RIGID: Conduit Bending Calculator1.1.3 - App Store
You'll be able to see results in few seconds.
Publisher Description
RIGIDpro is an advanced bending calculator that was specifically made for helping with Mechanical, Electrical, and Hydraulic Benders. A true respectable side kick to any electrician working with conduit of any type and size. Whether you need to swiftly obtain information about the bender you’re using, or a multiplier card without scrounging through your wallet, or a calculator with the capability of working with fractions (x/16”) and decimals simultaneously, or a bender calculator that accounts for gain and shrink. Allowing you to layout multiple bends on a single conduit quickly. RIGIDpro is your answer.
-----
RIGIDpro is broken into 5 different categories.
Select Bender: Create, load, and delete benders of various types. Select from several different types of bender styles whether it’s a Mechanical, Electrical, or Hydraulic Bender. All Benders are programmed with the Centerline Radius and Take-Up of the shoe that are based on their factory settings found within their manuals (accuracy may vary slightly).
Shoe Specs: Edit and view the information about the selected bender. With a simple click and drag you can change the Centerline Radius (this information can usually be found on the bender’s shoe) or the Take-Up of the specific shoe size being used. Quickly discover additional information about the specified bender’s shoe such as the Gain, Setback, Travel and Radius Adjustment.
Mark Conduit: Have a complicated bend? Say a 25” stub, a Three Bend Saddle that needs to be centered 35” from the Back of that 90 at a 22.5 degree interval and needs to clear a 4” conduit, with another 90 66 1/2” inches away from the back of the previous 90, and it needs to be cut 25” from the back of that 90. Not only that, but you don’t have the luxury of having a pony handy and you only have a table threader. No problem. The advanced bending calculator of RIGIDpro can handle anything you throw at it.
With additional features that allow you to change the conduit size and type; Mark to Center, which deciphers between placing marks at the tip of the hook or the center of the bend; Measure To Center, which will align all bends to the center of conduits, ideal for running raceways with various sizes of conduit. There is the ability to go and edit specific bend measurements; if you wanted the first 25” 90 stub to be 27” without changing the distance afterwards. Also if you have a ground-man and they don’t have the app? RIGIDpro can send them a text with all of the information detailed within the message with a click of the button (make sure it’s okay with them before sending any text messages, all normal rates will apply.).
Bends supported are 90 Bends, Offsets, Three Bend Saddle, Four Bend Saddle, Kick with 90 Bends, Kicks, Segmented 90 (3 - 49 shots), and Cut Conduit. With more bends to soon come these bends may be added into whatever sequence you can cleverly come up with.
All marks and measurements are based on the push-trough method, from first to last and the Centerline Radius.
Multiplier Card: Quickly reference the distance multipliers and shrink constants from 0.5 degree - 90 degrees. Also view the Outside, Inside, and Knock-Out Diameters from 1/2” - 6” conduit of all types.
Calculator: Simple, yet sophisticated. It contains functions such as addition, subtraction, multiplication, and division. Also includes the ability to store and recall memory, squaring, and calculating the square root. The calculator gives you the ability to quickly transpose from Fraction:Decimal and Decimal:Fraction. Easily mixing formulas such as 2.61 x 3 1/4”.
-----
If you have any suggestions, or notice any bugs please e-mail me RIGIDpro@outlook.com. I’ll do my best to accommodate to everyone. Hand-Benders are not supported with this app -- only Mechanical, Electrical and Hydraulic. There will be more benders make/models added in the future.
Version History • Bug Fixes 1.1.3 05/16/2016 • Bug Fixes
• New color scheme for the 'Shoe Specs'
• More to come as I optimize for all Apple hand-held devices. 1.1.2 05/28/2015 v1.1.1
•'Footer Buttons' have been cleaned up
•'Footer Buttons: Scroll Bar' now has "Press & Slide" on it. Making it more recognizable that it can be used to easily adjust values.
•'Footer Buttons: Scroll Bar' has a feature indicating that it's being pressed down.
•Icon has changed.
More updates to come as I optimize RIGIDpro, for all Apple devices. If you have something you'd like to have added feel free to e-mail me, rigidpro@outlook.com 1.1.1 05/12/2015 NOTICE: In order to quickly change values just simply hold and slide finger on the slider-bar that appears on the bottom of the screen after selecting a measurement to change. Compounds 90s are supported just add a "segmented 90" and select two shots. Thank you.
•Metric Conversion: Easily switch between Standard Units and Centimeters by going to the Settings apps or Mark Conduit: Settings.
•Greenlee 884/885 automatically displays marks to the center of the shoe.
•Left/Right taps in Mark Conduit: Add Bend directions were switched (that sounds weird, but you know what I mean)
•Adjusted appearance/organization of the Multiplier Card.
•Segmented 90s can now be adjusted to 2 shots.
•Fixed Random Bugs
In memory of Stephan Lieber, IBEW L.U. #429
-Bret H. Hardman 1.1.0 05/08/2014 -Start Info, now displays when app first opens up, and stops displaying shortly after creating a Bender.
-Clicking 'Done' in 'Create' Bender with lack of information now pops up an Alert Window informing you what needs to be completed to create a bender.
-Keyboard in 'Create' for 'Bender Name' now closes.
-Text Field in 'Create' section is now more obvious. With a place holder of 'Enter Bender Name Here'.
-Info on terms placed next to items in 'Shoe Specs' (I'll work on making them a little bit more thorough).
-Alert Window pops up when trying to add more bends to a stick after a Cut Mark has been placed informing you that the Cut Mark needs to be deleted before trying to add more bends.
Enjoy
-Bret H. Hardman 1.0.1 01/19/2014 1.0.0 01/11/2014
About RIGID: Conduit Bending Calculator
The company that develops RIGID: Conduit Bending Calculator is Bret Hardman. The latest version released by its developer is 1.1.3.
To install RIGID: Conduit Bending Calculator on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-15 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the RIGID: Conduit Bending Calculator as malware if the download link is broken.
How to install RIGID: Conduit Bending Calculator on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the RIGID: Conduit Bending Calculator is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After RIGID: Conduit Bending Calculator is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.1.3
posted on 2026-10-15
Version History • Bug Fixes 1.1.3 05/16/2016 • Bug Fixes
• New color scheme for the 'Shoe Specs'
• More to come as I optimize for all Apple hand-held devices. 1.1.2 05/28/2015 v1.1.1
•'Footer Buttons' have been cleaned up
•'Footer Buttons: Scroll Bar' now has "Press & Slide" on it. Making it more recognizable that it can be used to easily adjust values.
•'Footer Buttons: Scroll Bar' has a feature indicating that it's being pressed down.
•Icon has changed.
More updates to come as I optimize RIGIDpro, for all Apple devices. If you have something you'd like to have added feel free to e-mail me, rigidpro@outlook.com 1.1.1 05/12/2015 NOTICE: In order to quickly change values just simply hold and slide finger on the slider-bar that appears on the bottom of the screen after selecting a measurement to change. Compounds 90s are supported just add a "segmented 90" and select two shots. Thank you.
•Metric Conversion: Easily switch between Standard Units and Centimeters by going to the Settings apps or Mark Conduit: Settings.
•Greenlee 884/885 automatically displays marks to the center of the shoe.
•Left/Right taps in Mark Conduit: Add Bend directions were switched (that sounds weird, but you know what I mean)
•Adjusted appearance/organization of the Multiplier Card.
•Segmented 90s can now be adjusted to 2 shots.
•Fixed Random Bugs
In memory of Stephan Lieber, IBEW L.U. #429
-Bret H. Hardman 1.1.0 05/08/2014 -Start Info, now displays when app first opens up, and stops displaying shortly after creating a Bender.
-Clicking 'Done' in 'Create' Bender with lack of information now pops up an Alert Window informing you what needs to be completed to create a bender.
-Keyboard in 'Create' for 'Bender Name' now closes.
-Text Field in 'Create' section is now more obvious. With a place holder of 'Enter Bender Name Here'.
-Info on terms placed next to items in 'Shoe Specs' (I'll work on making them a little bit more thorough).
-Alert Window pops up when trying to add more bends to a stick after a Cut Mark has been placed informing you that the Cut Mark needs to be deleted before trying to add more bends.
Enjoy
-Bret H. Hardman 1.0.1 01/19/2014 1.0.0 01/11/2014
version 1.1.3
posted on 2026-09-03
Version History This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.
• Bug Fixes 1.1.3 05/16/2016 • Bug Fixes
• New color scheme for the 'Shoe Specs'
• More to come as I optimize for all Apple hand-held devices. 1.1.2 05/28/2015 v1.1.1
•'Footer Buttons' have been cleaned up
•'Footer Buttons: Scroll Bar' now has "Press & Slide" on it. Making it more recognizable that it can be used to easily adjust values.
•'Footer Buttons: Scroll Bar' has a feature indicating that it's being pressed down.
•Icon has changed.
More updates to come as I optimize RIGIDpro, for all Apple devices. If you have something you'd like to have added feel free to e-mail me, rigidpro@outlook.com 1.1.1 05/12/2015 NOTICE: In order to quickly change values just simply hold and slide finger on the slider-bar that appears on the bottom of the screen after selecting a measurement to change. Compounds 90s are supported just add a "segmented 90" and select two shots. Thank you.
•Metric Conversion: Easily switch between Standard Units and Centimeters by going to the Settings apps or Mark Conduit: Settings.
•Greenlee 884/885 automatically displays marks to the center of the shoe.
•Left/Right taps in Mark Conduit: Add Bend directions were switched (that sounds weird, but you know what I mean)
•Adjusted appearance/organization of the Multiplier Card.
•Segmented 90s can now be adjusted to 2 shots.
•Fixed Random Bugs
In memory of Stephan Lieber, IBEW L.U. #429
-Bret H. Hardman 1.1.0 05/08/2014 -Start Info, now displays when app first opens up, and stops displaying shortly after creating a Bender.
-Clicking 'Done' in 'Create' Bender with lack of information now pops up an Alert Window informing you what needs to be completed to create a bender.
-Keyboard in 'Create' for 'Bender Name' now closes.
-Text Field in 'Create' section is now more obvious. With a place holder of 'Enter Bender Name Here'.
-Info on terms placed next to items in 'Shoe Specs' (I'll work on making them a little bit more thorough).
-Alert Window pops up when trying to add more bends to a stick after a Cut Mark has been placed informing you that the Cut Mark needs to be deleted before trying to add more bends.
Enjoy
-Bret H. Hardman 1.0.1 01/19/2014 1.0.0 01/11/2014
version 1.1.3
posted on 2026-08-13
Version History This update from Apple will improve the functionality of this app. No new features are included.
• Bug Fixes 1.1.3 05/16/2016 • Bug Fixes
• New color scheme for the 'Shoe Specs'
• More to come as I optimize for all Apple hand-held devices. 1.1.2 05/28/2015 v1.1.1
•'Footer Buttons' have been cleaned up
•'Footer Buttons: Scroll Bar' now has "Press & Slide" on it. Making it more recognizable that it can be used to easily adjust values.
•'Footer Buttons: Scroll Bar' has a feature indicating that it's being pressed down.
•Icon has changed.
More updates to come as I optimize RIGIDpro, for all Apple devices. If you have something you'd like to have added feel free to e-mail me, rigidpro@outlook.com 1.1.1 05/12/2015 NOTICE: In order to quickly change values just simply hold and slide finger on the slider-bar that appears on the bottom of the screen after selecting a measurement to change. Compounds 90s are supported just add a "segmented 90" and select two shots. Thank you.
•Metric Conversion: Easily switch between Standard Units and Centimeters by going to the Settings apps or Mark Conduit: Settings.
•Greenlee 884/885 automatically displays marks to the center of the shoe.
•Left/Right taps in Mark Conduit: Add Bend directions were switched (that sounds weird, but you know what I mean)
•Adjusted appearance/organization of the Multiplier Card.
•Segmented 90s can now be adjusted to 2 shots.
•Fixed Random Bugs
In memory of Stephan Lieber, IBEW L.U. #429
-Bret H. Hardman 1.1.0 05/08/2014 -Start Info, now displays when app first opens up, and stops displaying shortly after creating a Bender.
-Clicking 'Done' in 'Create' Bender with lack of information now pops up an Alert Window informing you what needs to be completed to create a bender.
-Keyboard in 'Create' for 'Bender Name' now closes.
-Text Field in 'Create' section is now more obvious. With a place holder of 'Enter Bender Name Here'.
-Info on terms placed next to items in 'Shoe Specs' (I'll work on making them a little bit more thorough).
-Alert Window pops up when trying to add more bends to a stick after a Cut Mark has been placed informing you that the Cut Mark needs to be deleted before trying to add more bends.
Enjoy
-Bret H. Hardman 1.0.1 01/19/2014 1.0.0 01/11/2014
version 1.1.3
posted on 2016-05-16
This app has been updated by Apple to display the Apple Watch app icon.
• Bug Fixes
version 1.1.3
posted on 2016-05-16
May 16, 2016
Version 1.1.3
This app has been updated by Apple to display the Apple Watch app icon.
• Bug Fixes
version 1.1.3
posted on 2016-05-16
May 16, 2016
Version 1.1.3
This app has been updated by Apple to display the Apple Watch app icon.
• Bug Fixes
version 1.1.3
posted on 2014-01-11
Disclaimer
Official App Store Link
We do not host RIGID: Conduit Bending Calculator on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for RIGID: Conduit Bending Calculator is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
